Aussie Gold Vinyl Repair Kit is specially formulated to repair inflatables, vinyl pool liners and air mattresses. Patching can be done out of water or underwater.
The kit includes
- 2 strips of vinyl patch (approx 600mm x 135mm)
- glue (60ml)
- applicator wand
Directions for use
Cleaning the surface
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner
Cutting the patch
Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Apply the adhesive
Light gauge vinyl and inflatables: Apply the adhesive sparingly to the patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to the patch, covering it evenly all over
Applying the patch
Out of water: Apply the patch to cover damaged area ensuring you press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: Keep the patch folded onto itself over the area to be repaired, then unfold the patch and apply immediately. Carefully press out all air and water bubbles. Apply weight if possible and allow 24 hours to reach full bond strength.
Avoid breathing vapours. Avoid frequent or prolonged contact with skin.
Keep out of reach of children
Highly flammable. Keep away from naked flame.
If you experience difficulty in breathing, leave area to obtain fresh air. In case of eye contact, flush immediatly with plenty of water for 15 minutes and get medical attention; for skin, wash thoroughly with soap and water.